Non-ionic emulsifying wetting agent, recommended as emulsifying high-viscosity silicone oil and removing silicon spots. It is especially recommended as an emulsifier and penetrant in the pre-treatment process of textiles.

　　1. physical properties

　　Appearance: colorless or slightly yellow transparent liquid

　　Viscosity: 100~800C. S. T.

　　PH value:

　　E0%: 70. 5%

　　Moles EO: 10. 1

　　HLB: 14. 1

　　Cloud point: 65℃

　　Ionicity: Non-ionic

　　Active matter content: 90%

　　Specific gravity: (25°℃) about 1.009g/mL

　　Ross-Miles Foam: 150/24

　　surface tension (1%AQ): 27 dyne

　　Note: The height of Ross-Miles Foam mm is at 1% active agent content, 25℃ immediately/5 minutes.

　　2. Product performance

　　1. Excellent dissolving and emulsifying ability

　　2. Significant wetting and spreading

　　3. Significant permeability

　　4. Remarkable ability to remove greasy dirt

　　5. Excellent performance-price ratio

　　6. High solubility in organic solvents

　　7. Low water viscosity, small gel range, can emulsify high viscosity silicone oil

　　8. Excellent compatibility

　　3. Recommended use

　　Silemulsifier NW 800 is recommended for

　　·Used as emulsifying high viscosity silicone oil, and removing silicon spots

　　·As a wetting and dispersing agent for wax or resin dispersion

　　·As an emulsifying and penetrating agent in the pretreatment process of textiles

　　·As wetting agent, antistatic agent and emulsifier in fiber lubricant

　　·Agricultural dispersant and wetting agent

　　·Used to remove non-polar grease dirt and high-performance descaling agent

　　·Stable in hydrogen peroxide solution

　　·Circuit board cleaner

　　·Used in leather infiltration, tanning and dyeing processes

　　·Used to produce oil-in-water emulsion