Applications

Non-iron finishing application scheme for shirts and suits

Fuju has a number of doctors and masters, focusing on product applications in each field, and providing solutions for many customers

   Shinchem SS 6175 and Shinchem SS 6186 can be used for non-iron finishing of shirts and suits according to the following scheme.

   Suggested plan:

  1. The recommended dosage is 80g/L, the rolling rate is 60-70%, the baking temperature is 160 degrees Celsius, and the time is 30 seconds.

  2, the matching ratio is as follows:


a.

Water

91.2%

b.

Citric acid

0.8%

c.

Shinchem SS 6175

1.28%

d.

Shinchem SS 6186

6.72%


  3. Suggested dilution steps:

   diluted in order of abcd

  4. Matters needing attention:

  a. The temperature of the solution in the rolling bath should be less than 55 degrees Celsius.

  b, try to keep the rolling rate at 70%.

  c. The fine hairs on the roll should be removed in time.

  d, the baking temperature is above 140 degrees Celsius, adjust the baking temperature according to the whiteness requirements.

  e, rust will affect the use effect.